Rustins quick drying Blackboard Paint provides a matt black non-reflective surface for blackboards and photographic work. The product is suitable for interior and exterior use and conforms to the Toy safety regulations.
Preparation: Apply Rustins Blackboard Paint to a clean surface. No primer or undercoat is required. Previous coated surfaces are to be rubbed down to provide a key. If the existing finish is not in good condition, remove with a Paint and Varnish Stripper.
Application: Open in a well ventilated area and stir well before use. It is recommended to use a large synthetic soft tipped brush to apply. Do not apply directly onto a warm surface or in strong sunlight and allow 30 minutes drying time. After application sand lightly with a fine abrasive paper, and then add the second coat. Two coats of Rustins Blackboard Paint are recommended.
Maintenance: To maintain the surface, we advise that any surface chalk be wiped away with a fine damp cloth. When re coating, wipe surface down with a mild detergent and water, and allow to dry before re-coating.
Storage: Secure lid tightly, store in a cool dry place and protect from frost.
Cleaning: Brushes should be cleaned with water when finished.
Please see our Rustins product section for a full range of Rustins products stocked.
We also supply a range of interior and exterior Paints.
Rustins Quick Dry Blackboard Paint Product Information Sheet
Rustins Quick Dry Blackboard Paint Safety Data Sheet
Thank you for registering for our newsletter.
Please provide valid email address